-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide
-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide
-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide

CBI’s new hydraulic magnetic Battery Storage MCB Range sets a new
standard in renewable energy and ensures that the batteries in the
installation are protected and disconnected in the safest possible
manner. The unit contains both poles in the same box and is available
up to a rated current of 250 A.
Available in 2P 100A &125A and 4P 160A & 250A options.


