-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide
-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide
-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide




-
DIN rail mounting for incorporating into distribution switchboards
-
Available in self-contained enclosure with N-C or NO contactor and lockable hinged door
-
Provision for sensing up to 3 x 240V lighting circuits
-
LED status indicator
-
TEST button simulates lighting circuit failure and automatic two hour minimum (battery discharge) time delay
-
RESET button aborts test function
-
RCM compliant and registered on ERAC/EESS database
-
Tamper seal
HLR3 Operating Instruction

HLR3

