-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide
-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide
-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide


-
Used to assist in the laying and pulling of cable into conduits under floors, under ground, etc
-
Suitable for most cable insulation and conduits
-
Used widely in electrical, telecommunications, industrial & electrical supply industries
-
Effective for the placement of large cable and long difficult pulls
-
Slides on smoothly & clings throughout the pull
-
Easy to handle & apply
-
Compatible with a wide range of cable types
-
Non staining – non toxic
-
Excellent lubricity & clingability
-
Max tension reduction in all types of cable pulling
-
Retains lubricity for months after use
-
Effective for long pulls with multiple bends
-
Pack size: 1 litre, 4 litre & 20 litre containers

Slipry Gel Cable Pulling Lubricant
