-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide
-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide
-
Provides 30mA residual current protection
-
Complies with AS 3111 & AS/NZS 3190 (Approval Number NSW21007)
-
Switches both the Active and Neutral Poles
-
26mm Width
-
Hydraulic-magnetic RCBO
-
Overcurrent trip point unaffected by ambient temperature
-
Operating voltage: 110V to 240V AC (50Hz/60Hz)
-
Immune to pulsating DC
-
IP2X Shrouded line and load terminals
-
3 POLE 5 modules wide




-
Robust 1.2mm steel construction
-
Form 1
-
IP40 degree of protection
-
130mm enclosure depth including door
-
Comes with single phase 100A rated busbar comb. Optionally available in 3 phase. (All busbar comb are fully insulated)
-
X15 electric orange powder coated finish (75microns) to AS2700
-
Drop down door lock kit
-
Comes with earth & neutral bars fitted
-
I.P.A. for circuit identification (comes with red phase studs and can be modified to accommodate a 3 phase setup)
-
Padlocking facility can be added for main switch and all outgoing circuits
-
IP2X line & load terminals
-
All labels secured with stainless steel screws
-
Dummy circuit breakers used as pole fillers

HCF Mining Duty Load Centre Range

